Measurement Of Properties Research Articles

Safeguarding public facilities: a study on enhancing safety in mosque amenities through slip-resistance and surface innovations

Purpose This study critically examines the safety aspects of ablution spaces in United Arab Emirates (UAE) mosques, emphasising the evaluation of smooth ceramic tile floorings prone to water accumulation. As an integral practice in Islamic worship, ablution spaces cater to a diverse demographic, making their safety a paramount concern. This study aims to meticulously assess slip-resistance properties and surface characteristics to provide practical recommendations for enhanced safety measures. Design/methodology/approach The investigation involves in situ measurements of traction properties and an extensive analysis of surface features in thirty mosques across the UAE. This comprehensive approach allows for identifying the unique challenges posed by ceramic tile floorings in ablution spaces. The study uses a portable tribometer for dynamic friction coefficient measurements, ensuring accurate slip-resistance evaluations. Surface texture analysis uses a portable profilometer to quantify roughness parameters. Findings The study’s findings significantly advance the comprehension of safety considerations in ablution spaces. Through empirical evidence and evidence-based insights, the research identifies immediate safety concerns and provides practical recommendations to create secure and inclusive environments within mosques. The emphasis lies on safeguarding the well-being of worshippers and contributing to the broader goal of safety in religious spaces. Originality/value The original contribution of this study lies in its dual focus on immediate safety concerns and the deeper understanding of unique safety challenges within ablution spaces. By offering evidence-based insights and practical recommendations, the research strives to make meaningful contributions to creating secure and inclusive environments within mosques.

Profilometry‐Based Indentation Plastometry and Uniaxial Testing of Pipelines: Detection of In‐Plane Anisotropy and Potential for Simplification of Test Procedures

This article concerns anisotropy in stress–strain relationships exhibited by steel pipelines. Since the stress from internal pressurization is highest in the hoop direction, standard industrial practice to measure these properties has focussed on tensile testing in this direction, requiring a prior flattening operation. The associated plastic deformation may affect properties, typically causing a (poorly‐defined) degree of hardening and the creation of inhomogeneity. Field testing of such pipelines, requiring in situ measurement of tensile properties (yield stress (YS) and ultimate tensile stress (UTS)), is based on indentation testing of the outer surface. One such test (profilometry‐based indentation plastometry (PIP)), not only gives the stress–strain curve, but also allows detection of any (in‐plane) anisotropy, with a high sensitivity. Both PIP testing and compression testing (with and without prior flattening) have confirmed that none of the eight pipes examined in the current work exhibited any such anisotropy, although the effects of flattening did tend to generate apparent anisotropy in the tensile test outcomes. It may therefore be appropriate to switch the focus of tensile testing to the axial direction, such that no flattening would be required.

Neutron scattering and neural-network quantum molecular dynamics investigation of the vibrations of ammonia along the solid-to-liquid transition

Vibrational spectroscopy allows us to understand complex physical and chemical interactions of molecular crystals and liquids such as ammonia, which has recently emerged as a strong hydrogen fuel candidate to support a sustainable society. We report inelastic neutron scattering measurement of vibrational properties of ammonia along the solid-to-liquid phase transition with high enough resolution for direct comparisons to ab-initio simulations. Theoretical analysis reveals the essential role of nuclear quantum effects (NQEs) for correctly describing the intermolecular spectrum as well as high energy intramolecular N-H stretching modes. This is achieved by training neural network models using ab-initio path-integral molecular dynamics (PIMD) simulations, thereby encompassing large spatiotemporal trajectories required to resolve low energy dynamics while retaining NQEs. Our results not only establish the role of NQEs in ammonia but also provide general computational frameworks to study complex molecular systems with NQEs.

Magnetic order in holmium and erbium formate: Parent frameworks for a potential random spin chain paramagnet

This work uses a combination of neutron diffraction and bulk property measurements to establish the low temperature magnetic states in the dense metal-organic frameworks Ho(HCO2)3 and Er(HCO2)3; whose structures feature chains of face-sharing LnO9 polyhedra packed into a triangular lattice. Below 0.7 K Ho(HCO2)3 is found to adopt a state in which the magnetic moment on its ferromagnetic chains vary from neighbouring chains but the sum around each triangle is constant. Er(HCO2)3 is found to be the first lanthanide formate to adopt an ordered magnetic state with antiferromagnetic coupling within its chains near 50 mK. The potential to combine the ferromagnetic and antiferromagnetic coupling within chains associated with Ho and Er cations, respectively, in the same compound has also been explored via the series Ho1-xErx(HCO2)3. Ho0.5Er0.5(HCO2)3 remains paramagnetic to 0.4 K, suggesting it may be a starting point to search for a random spin chain paramagnet.

On the bubble-bubbleless ocean continuum: Lidar measurement of underwater bubble properties during storm conditions.

On the bubble-bubbleless ocean continuum: Lidar measurement of underwater bubble properties during storm conditions.

The Simons Observatory: Production-Level Fabrication of the Mid- and Ultra-High-Frequency Wafers

AbstractThe Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with $$88\%$$ 88 % of detector wafers meeting nominal criteria for integration into a detector module: a channel yield $$>95\%$$ > 95 % and $$T_{\textrm{c}}$$ T c in the targeted range.

Non-linear Tendon Fatigue Life under Uncertainties

Tendons play a pivotal role in facilitating joint movement by transmitting muscular forces to bones. The intricate hierarchical structure and diverse material composition of tendons contribute to their non-linear mechanical response. However, comprehensively grasping their mechanical properties poses a challenge due to inherent variability in biological tissues. This necessitates a thorough examination of uncertainties associated with properties measurements, particularly under diverse loading conditions. Given the cyclic loading experienced by tendons throughout an individual's lifespan, understanding their mechanical behaviour under such circumstances becomes crucial.This study addresses this need by introducing a generalised Paris Erdogan Law tailored for non-linear materials. To examine uncertainties within this proposed framework, Monte Carlo Analysis is employed. This approach allows for a thorough exploration of the uncertainties associated with tendon mechanics, contributing to a more robust comprehension of their behaviour under cyclic loading conditions.Finally, self-healing has been integrated into the fatigue law of tendons through the proposal of a healing function, formulated as a polynomial function of the maximum stress. This approach allows to account for an increase in the number of cycles for each stress value due to self-repair after the damage event generated by long-term cycling load over the individual’s life span.

A novel small specimen testing method based on a pneumatic bulging test: Measurement of tensile properties at high temperatures

A novel small specimen testing method based on a pneumatic bulging test: Measurement of tensile properties at high temperatures

A broadband pulse amplifier for Joule heating experiments in diamond anvil cells.

Decades of measurements of the thermophysical properties of hot metals show that pulsed Joule heating is an effective method to heat solid and liquid metals that are chemically reactive or difficult to contain. To extend such measurements to hundreds of GPa pressure, pulsed heating methods have recently been integrated with diamond anvil cells. The recent design used a low-side switch and active electrical sensing equipment that was prone to damage and measurement error. Here, we report the design and characterization of new electronics that use a high-side switch and robust, passive electrical sensing equipment. The new pulse amplifier can heat ∼5 to 50 μm diameter metal wires to thousands of kelvin at tens to hundreds of GPa using diamond anvil cells. Pulse durations and peak currents can each be varied over three orders of magnitude, from 5 µs to 10ms and from 0.2 to 200A. The pulse amplifier is integrated with a current probe. Two voltage probes attached to the body of a diamond anvil cell are used to measure voltage in a four-point probe geometry. The accuracy of four-point probe resistance measurements for a dummy sample with 0.1 Ω resistance is typically better than 5% at all times from 2 µs to 10ms after the beginning of the pulse.

MgHg(SeO3)2(H2O)2 : A Magnesium Mercury Selenite with Large Birefringence

Selenite crystalline materials have been popular owing to the diverse structures and optical performances. A new mercury selenite, MgHg(SeO3)2(H2O)2, was synthesized by using a conventional hydrothermal method. It crystallizes in the monoclinic structure with a C2/c space group, MgHg(SeO3)2(H2O)2 exhibits a three-dimensional (3D) structure, which is made up of [Hg(SeO3)2]2–∞ chains and distorted MgO4(H2O)2 octahedra . Besides, it presents a large birefringence of 0.137 @ 546 nm according to experimental measurement. Synthesis, crystal structure, thermal stability, optical property measurements and theoretical studies were performed in this work.

Relationships between texture and water property measurements in raw intact broiler breast fillets with the wooden breast condition

Relationships between texture and water property measurements in raw intact broiler breast fillets with the wooden breast condition

Mechanical property measurement at high temperature based on a new disc-shaped specimen

Three-dimensional digital image correlation (3D-DIC) is frequently used to measure mechanical properties of materials. However, the traditional dumbbell-shapedspecimen has some limitations for measurment of mechanical properties of materials by use of 3D-DIC at high temperature due to two reasons: (1) its transverse dimension is very small and only a small number of valid speckles can be used in 3D-DIC; and (2) only a small amount of valid information, such as the average deformation of the gauge length, can be used to obtain mechanical properties in one direction. In this work, a new test method based on a disc-shaped standard specimen is first proposed. By use of analytical solutions of a disc under a uniform radial load, and measured results of the full-field displacement of the disc-shaped specimen by 3D-DIC in an effective test region at different high temperatures, mechanical properties at different high temperatures are identified.

CaCu3Ti4O12 ceramic via oxalate route: synthesis, characterization and electrical properties

In this manuscript, a new method for the synthesis of CaCu3Ti4O12 (CCTO) perovskite was adopted via co-precipitation followed by calcination processes. The co-precipitation route was employed to synthesize calcium and copper oxalates precipitated on the TiO2 surfaces and the calcination technique at different temperatures was utilized to follow the single-phase formation. Differential thermal analysis-thermogravimetry (DTA-TG) were used to estimate the proper calcination temperatures and to follow the precursor`s decomposition stages. X-ray diffraction (XRD) revealed the initiation of titanate formation at 700oC. The complete formation of single-phase was achieved at 1100oC. In agreement with the XRD measurements, FT-IR spectra confirmed the formation the different phases at different calcination temperatures. The prepared titanate showed giant dielectric properties with values higher than reported in literature. The conductivity measurement indicated semi-conducting properties and revealed a transition agreed well with that obtained in the dielectric properties measurements vs. temperature, attributed to the orientional polarization or change in the entire conduction mechanism from hopping to ionic conduction. The obtained electrical properties enhances the utilization of the entire titanate as capacitors.

Conversion Factors for Physical Property Measurements in different Rest Frames Using a Revised Version of Relativity Theory Based on the Uniform Scaling Method

Conversion Factors for Physical Property Measurements in different Rest Frames Using a Revised Version of Relativity Theory Based on the Uniform Scaling Method

Reducing plug flow effect on measured rheological results of cement-based materials: Image analysis and numerical iteration approach

The rheological properties of cement-based materials (CBM) significantly influence their workability and application in construction. Despite the common use of coaxial cylinder rheometers for measuring these properties, challenges arise, particularly at low shear rates due to plug flow within the tested samples. This study aims to investigate the impact of plug flow on rheological property measurements of CBM and proposes strategies to enhance measurement accuracy. An image analysis method and a novel numerical iteration algorithm were proposed in this study to address plug flow effects. Three series fresh cement paste with different fluidities were prepared to conduct the rheological tests. Through the image analysis method, actual shear radii at different rotor speeds were measured. The corresponding rheological parameters were determined and compared using the complete shear assumption, the image analysis method, and numerical iteration algorithm, respectively. The results indicated the great influence of plug flow on rheological results, especially at low shear rates and low fluidities, highlighting the need for its consideration in rheological parameters calculations. Moreover, the proposed numerical iteration algorithm was verified to calculate the incomplete shear state of CBM and improve the measurement accuracy of rheological parameters. The extensions and limitations of the numerical iteration algorithm in its application were discussed further.

Model discovery approach enables noninvasive measurement of intra-tumoral fluid transport in dynamic MRI.

Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) is a routine method to noninvasively quantify perfusion dynamics in tissues. The standard practice for analyzing DCE-MRI data is to fit an ordinary differential equation to each voxel. Recent advances in data science provide an opportunity to move beyond existing methods to obtain more accurate measurements of fluid properties. Here, we developed a localized convolutional function regression that enables simultaneous measurement of interstitial fluid velocity, diffusion, and perfusion in 3D. We validated the method computationally and experimentally, demonstrating accurate measurement of fluid dynamics in situ and in vivo. Applying the method to human MRIs, we observed tissue-specific differences in fluid dynamics, with an increased fluid velocity in breast cancer as compared to brain cancer. Overall, our method represents an improved strategy for studying interstitial flows and interstitial transport in tumors and patients. We expect that our method will contribute to the better understanding of cancer progression and therapeutic response.

Electrocatalytic properties of Ni–Cu structures fabricated by electrodeposition of Cu on Ni cones

Ni–Cu alloys are a suitable candidate as a catalyst in Hydrogen Evolution Reaction due to their catalytic performance and good stability. To enhance this activity more, the active surface area of the material should be enhanced. It is commonly achieved by the synthesis of metals and alloys in the form of nanostructures. In this work, Ni cones fabricated by the one-step method were applied as a substrate for the deposition of thin Cu layers. Then, these materials were annealed in an ambient atmosphere to obtain Ni–Cu structures. The investigation of changes in morphology and chemical composition, as well as roughness and wettability before and after the annealing process was performed. Moreover, the measurements of catalytic properties were carried out in 1 M NaOH. The values of the Tafel slope and the electrochemical active surface area were studied. The proposed method can be successfully applied to fabricate structures of other alloys for the desired properties.

Ionic Liquids for the Separation of Fluorocarbon Refrigerant Mixtures.

This review discusses the research being performed on ionic liquids for the separation of fluorocarbon refrigerant mixtures. Fluorocarbon refrigerants, invented in 1928 by Thomas Midgley Jr., are a unique class of working fluids that are used in a variety of applications including refrigeration. Fluorocarbon refrigerants can be categorized into four generations: chlorofluorocarbons, hydrochlorofluorocarbons, hydrofluorocarbons, and hydrofluoroolefins. Each generation of refrigerants solved a key problem from the previous generation; however, each new generation has relied on more complex mixtures that are often zeotropic, near azeotropic, or azeotropic. The complexity of the refrigerants used and the fact that many refrigerants form azeotropes when mixed makes handling the refrigerants at end of life extremely difficult. Today, less than 3% of refrigerants that enter the market are recycled. This is due to a lack of technology in the refrigerant reclaim market that would allow for these complex, azeotropic refrigerant mixtures to be separated into their components in order to be effectively reused, recycled, and if needed repurposed. As the market for recovering and reclaiming refrigerants continues to grow, there is a strong need for separation technology. Ionic liquids show promise for separating azeotropic refrigerant mixtures as an entrainer in extractive distillation process. Ionic liquids have been investigated with refrigerants for this application since the early 2000s. This review will provide a comprehensive summary of the physical property measurements, equations of state modeling, molecular simulations, separation techniques, and unique materials unitizing ionic liquids for the development of an ionic-liquid-based separation process for azeotropic refrigerant mixtures.

Antimicrobial Effect of Honey Phenolic Compounds against E. coli—An In Vitro Study

Growing concern over antimicrobial resistance in chronic wound patients necessitates the exploration of alternative treatments from natural sources. This study suggests that honey’s phenolic compounds may offer antimicrobial benefits, warranting further investigation for therapeutic development. The main aim of this study was to investigate the antimicrobial activity of phenolic compounds and to determine the effects of their sub-inhibitory concentrations against Escherichia coli (E. coli). 3-phenyllactic acid (PLA), p-coumaric acid (PCA), and phloretin were tested against the bacterial strain of E. coli ATCC 25922. Comparison of the antimicrobial activity of honey constituents in vitro was performed using a broth culture assay. Measurement of the inhibitory properties of constituents in vitro was conducted using disc and well diffusion assays. The effects of sub-inhibitory concentrations of PCA on the susceptibility of E. coli ATCC 25922 to penicillin–streptomycin were tested. The results demonstrated that PLA was the most efficient antimicrobial agent, followed by PCA, whereas phloretin, at lower (2 mg/mL) concentrations, led to an increase in the growth of E. coli. Various modifications of the agar diffusion assay did not reveal the antibacterial properties of the studied phytochemicals. The enhancing effect of a sub-inhibitory concentration of PCA in cooperation with penicillin–streptomycin was shown. These findings might be helpful for the further investigation and development of new antimicrobial agents for the treatment of skin infections and wounds.

A cold laboratory hyperspectral imaging system to map grain size and ice layer distributions in firn cores

Abstract. The Greenland and Antarctic ice sheets are covered in a layer of porous firn. Knowledge of firn structure improves our understanding of ice sheet mass balance, supra- and englacial hydrology, and ice core paleoclimate records. While macroscale firn properties, such as firn density, are relatively easy to measure in the field or lab, more intensive measurements of microstructural properties are necessary to reduce uncertainty in remote sensing observations of mass balance, model meltwater infiltration, and constrain ice age – gas age differences in ice cores. Additionally, as the duration and extent of surface melting increases, refreezing meltwater will greatly alter firn structure. Field observations of firn grain size and ice layer stratigraphy are required to test and validate physical models that simulate the ice-sheet-wide evolution of the firn layer. However, visually measuring grain size and ice layer distributions is tedious, is time-consuming, and can be subjective depending on the method. Here we demonstrate a method to systematically map firn core grain size and ice layer stratigraphy using a near-infrared hyperspectral imager (NIR-HSI; 900–1700 nm). We scanned 14 firn cores spanning ∼ 1000 km across western Greenland’s percolation zone with the NIR-HSI mounted on a linear translation stage in a cold laboratory. We leverage the relationship between effective grain size, a measure of NIR light absorption by firn grains, and NIR reflectance to produce high-resolution (0.4 mm) maps of effective grain size and ice layer stratigraphy. We show the NIR-HSI reproduces visually identified ice layer stratigraphy and infiltration ice content across all cores. Effective grain sizes change synchronously with traditionally measured grain radii with depth, although effective grains in each core are 1.5× larger on average, which is largely related to the differences in measurement techniques. To demonstrate the utility of the firn stratigraphic maps produced by the NIR-HSI, we track the 2012 melt event across the transect and assess its impact on deep firn structure by quantifying changes to infiltration ice content and grain size. These results indicate that NIR-HSI firn core analysis is a robust technique that can document deep and long-lasting changes to the firn column from meltwater percolation while quickly and accurately providing detailed firn stratigraphy datasets necessary for firn research applications.